HP Proliant Integrated Management Log Viewer = Error “No System Management driver is loaded”

Today I got the annoying message “No System Management driver is loaded” when I was trying to open the HP Proliant Integrated Management Log Viewer. (Image below) After trying the open the HP Proliant Integrated Management Log Viewer with administrative rights. It seems to work only when you use “Run as administrator”.

VMWARE & HP | Trunking settings on VMware server and HP Procurve Switch

How to configure a trunk between a VMware server and a HP Procurve Switch. You can decide by yourself what to configured first. I will explainthe settings for the VMware ESX server first and than I will explain the switch configuration. Vmware ESX Server Login to the VMware VCenter Console. Click on an ESX Server … Continue reading VMWARE & HP | Trunking settings on VMware server and HP Procurve Switch

HP Procurve 2910 Switch (routing configuration)

1:     login to the switch through TELNET OR SSH 2:    Standard configuration does not contain a password 3:    type configure terminal 4:    type a hostname "name of the switch". 5:    Type vlan 1 and configure an ip address 6:    Enter a default gateway 7:    type ip routing & default route "ip route 0.0.0.0 0.0.0.0 x.x.x.x" When you enable routing, and default … Continue reading HP Procurve 2910 Switch (routing configuration)

Netgear Readynas 3200 2LAN connection to HP Procurve 2810-XX Switch

How to configure a Netgear Readynas 3200 with 2 lan connections to a HP Procurve 2810-24 or 48 switch. To configure a Netgear Readynas 3200 with 2 lan ports to an HP Procurve 2810-24/48 switch. On the Netgear Readynas 3200 you have to set the LAN connections too. At the tab Ethernet 1 you can … Continue reading Netgear Readynas 3200 2LAN connection to HP Procurve 2810-XX Switch