Netgear | ReadyData disk format cli for new volume

In previous posts I wrote about to add disks to a volume when it was degraded. Last week I walked in to the issue that i had 6 disks added to a volume which wasn't available to erase. Unless we had to go back to Factory defaults. Which wasn't an option. You have to login … Continue reading Netgear | ReadyData disk format cli for new volume

Advertisements

Netgear | Readydata 5200 | out of storage

Recently it happened to a customer where I go to time to time. That the storage of the Readydata 5200 was full. And we were not able to delete any of the files because there was no free space. This is a horrible problem if you want to free up some space. Although the customer … Continue reading Netgear | Readydata 5200 | out of storage

Netgear – Rebuild raid-set of a ReadyData 5200

Recently a customer had to replace a disk in the ReadyData 5200. How ever the disk came online but wasn't available for rebuilding of the raid array. I needed to contact L3 support for further help. The fix they supplied was easier than I thought, I followed the commands which the engineer used. You need to … Continue reading Netgear – Rebuild raid-set of a ReadyData 5200

HP – Netgear | Trunk configuration between and HP Procurve and a Netgear GSM7352

How to create a trunk between an HP Procurve switch and a Netgear GSM7352S. First I start on the Netgear switch. By going to the Tab: Switching > LAG. Create a new LAG with a useful name/number id. For the trunk it's best to use the static mode, enable STP and set the Admin Mode … Continue reading HP – Netgear | Trunk configuration between and HP Procurve and a Netgear GSM7352

Netgear Readynas 2120 | Shutdown and restart option ( Software version 6.0 )

When you bought a readynas 2120 with the new software version 6.0. And your looking seriously for the option to shutdown or reboot the ReadyNas. The solution is on the first page you can find. ( It’s the default over view page you get to see when you login for the first time to the … Continue reading Netgear Readynas 2120 | Shutdown and restart option ( Software version 6.0 )