Cisco | Changing usernames password on a Wireless Controller

It might happen you need to change the password of a user on the Cisco Wireless Controller. To change this password you need to access the wireless controller on 1 of the following ways. Telnet / SSH Console Login to the Cisco Wireless Controller. Go to the configuration mode. Using the command config. To change … Continue reading Cisco | Changing usernames password on a Wireless Controller

Advertisements

Cisco | SMB Switch SF 302-8P Configuration for wireless APs and Guest-LAN

Few days ago I configured a SF-302-8P cisco switch for usage of WiFi and a guest-LAN. To relize this solution i had to configure a few VLANs. A tip before you start upgrade to the last version of this Switch because than you have the most commond CLI commands in this switch. If you have … Continue reading Cisco | SMB Switch SF 302-8P Configuration for wireless APs and Guest-LAN

Cisco wireless Access-point from Autonomous AP to Lightweight AP ( quick change via CLI )

Yesterday and today I was working on a Cisco Wireless Controller and 13 AP’s which were standalone. I tried to use the convert tool of Cisco to change the AP’s, as this didn’t work on windows 7 x64. I had to look for an other solution.. And came up with the following idea to do. … Continue reading Cisco wireless Access-point from Autonomous AP to Lightweight AP ( quick change via CLI )

Cisco Wireless | 1 Access Point with 2 Bandwidth Frequencies ( 2.4Ghz and 5 Ghz ) and both with the same SSID

Few weeks ago I was able to configure my cisco AP 1131 AG. I wanted to configure this device with 2 channel frequencies. 1 at 2.4Ghz and 1 at 5Ghz, both frequencies had to be in the same SSID. I created on my device 2 SSID's 1 for my personal usage and 1 for my … Continue reading Cisco Wireless | 1 Access Point with 2 Bandwidth Frequencies ( 2.4Ghz and 5 Ghz ) and both with the same SSID