Cisco wireless Access-point from Autonomous AP to Lightweight AP ( quick change via CLI )

Yesterday and today I was working on a Cisco Wireless Controller and 13 AP’s which were standalone. I tried to use the convert tool of Cisco to change the AP’s, as this didn’t work on windows 7 x64. I had to look for an other solution.. And came up with the following idea to do.

I logged on to the AP with Telnet or Console cable and I used the following Command in the enable mode:

archive download-sw /force-reload /overwrite tftp://<ip address>/c1240-rcvk9w8-tar.124-21a.JA2.tar

With the Console cable you see the output like below:

examining image...
 Loading c1240-rcvk9w8-tar.124-21a.JA2.tar from <tftp ip address> (via BVI1): !
 extracting info (273 bytes)
 Image info:
 Version Suffix: rcvk9w8-
 Image Name: c1240-rcvk9w8-mx
 Version Directory: c1240-rcvk9w8-mx
 Ios Image Size: 2632192
 Total Image Size: 2632192
 Image Family: C1240
 Wireless Switch Management Version:
 Extracting files...
 c1240-rcvk9w8-mx/ (directory) 0 (bytes)O
 extracting c1240-rcvk9w8-mx/c1240-rcvk9w8-mx (2622783 bytes)!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 extracting c1240-rcvk9w8-mx/info (273 bytes)
 extracting info.ver (273 bytes)!!
 [OK - 2631680 bytes]
Deleting current version...
 Deleting flash:/c1240-k9w7-mx.123-8.JEA...done.
 New software image installed in flash:/c1240-rcvk9w8-mx
 Configuring system to use new image...done.
 Requested system reload in progress...archive download: takes 28 seconds

After this the AP will look for an Wireless LAN Controller (if you enter the correct names in the DNS the AP’s will find the WLAN Controller)

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s