Configuration Example Wireless for a Cisco Router 87xW

Below I put an example configuration of enabling the Wireless functionality of the Cisco Router Series 870W.
This configuration is easier than what your options are in the webinterface. And now you can disable also the ip http server on the router with no ip http server.

dot11 syslog
!
dot11 ssid EXAMPLE
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii EXAMPLE

interface Dot11Radio0
description Radio Interface
no ip address
no ip route-cache cef
no ip route-cache

encryption mode ciphers tkip

ssid EXAMPLE

speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
world-mode dot11d country NL both
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding

bridge irb
bridge 1 protocol ieee
bridge 1 route ip

interface Vlan1
no description LAN ( Description )
no  ip address < IP Address > < Subnet>
no  ip nat inside
no  ip virtual-reassembly
no  ip route-cache same-interface
no  ip route-cache policy
no  ip route-cache flow
no  hold-queue 100 in
no  hold-queue 100 out
no ip address
no ip proxy-arp
bridge-group 1

interface bvi1
description LAN ( Description )
ip address < IP Address > < Subnet>
ip nat inside
no shutdown
ip virtual-reassembly
ip route-cache same-interface
ip route-cache policy
ip route-cache flow
hold-queue 100 in
hold-queue 100 out

How to use Word 2007 for your Blog Entries

Not only can you have your Outlook 2007 pull your favorite RSS feeds directly into Outlook, you can also use Word 2007 to create and post blogs directly to your blog from your Word document…

“How do I get started?”, you may be thinking!

• First you’ll want to open Word 2007. Once you have Word opened, simply click your “Office Button” and then click “New”.
• Once you click new, you’ll be prompted do you want to create a new document or a new Blog. Select Blog.
• Then you’ll need to register your Word 2007 with your blog. I use WordPress, so I simply chose “WordPress” in the drop-down menu.
• You’ll be prompted for your Blog link, as well as your user name and password. Once you have typed this information in, your computer will be registered to publish directly to your blog. Images and all!

Try it out!

Source: http://ciscoospina.wordpress.com/2008/04/17/blogging-with-office-2007/