Reacties op: Basic Voice Router Configuration with SRST and Unity Express

Door: glazenbakje

glazenbakje — Fri, 10 Jul 2009 17:19:00 +0000

Hello,
They configuration we used. was the router was the main router for incoming and outgoing calls which where redirect to the Cisco CM.
The Router was also the SRST for the Call Manager.

Did you have the full configuration into the router?
It’s wierd. i can’t test it at the moment but if i have the possibility to test it i will let you know.
I remember when i tested it. It worked.

I hope the telephones has as Gateway the router ? can you check that

cheers

Door: howdy

howdy — Thu, 09 Jul 2009 15:40:43 +0000

Hi,
I’m experimenting with 2811, CME, H.323 and callmanager, but no luck so far.
The configuration file is just the same (except the interface configuration), but the phones doesn’t see any “standby” SRST callmanager at all. They are connected to the callmanager successfully via H323, and when I unplug the callmanager’s wire – the phones are in “configuring IP” or “configuring CM list” state…

Do you see the cisco router as second stand-by callmanager in the phones network settings during normal operation?

Regards

Door: Max

Max — Thu, 11 Sep 2008 22:48:56 +0000

Hi there,

Do you have any working example of SRST (Cisco 2811) with CallManager 4.2 using H.323 protocol?

Thanks